RIGOL DP832A - Manual (Page 28)

RIGOL Chapter 2 Command System
2-4 DP800 Programming Guide
:ANALyzer:ENDTime
Syntax :ANALyzer:ENDTime {<value>|MINimum|MAXimum}
:ANALyzer:ENDTime? [MINimum|MAXimum]
Description Set the end time of the analyzer.
Query the end time of the analyzer.
Parameter Name Type Range Default
<value> Integer Refer to the "Explanation"
Explanation  You can only set the end time when valid record file is opened (refer to
the :ANALyzer:FILE? command).
 When the groups of the record file opened is less than or equal to 2048, the
range of the end time is from the start time to the maximum record time
(groups times record period) of the record file opened and the default is the
maximum record time of the record file opened.
 When the groups of the record file opened is greater than 2048, the range of
the end time is from the start time to the product of the record period of the
record file opened times 2048 and the default is the product of the record
period of the record file opened times 2048.
 When receiving the :ANALyzer:ANALyze command, the analyzer will analyze
the recorded data between the start time and end time.
Return Format The query returns an integer, for example, 125.
Example :ANAL:ENDT 125 /*Set the end time of the analyzer to 125s*/
:ANAL:ENDT? /*Query the current end time and the query returns 125*/
Related
Commands
:ANALyzer:ANALyze
:ANALyzer:FILE?
:ANALyzer:STARTTime
:ANALyzer:FILE?
Syntax :ANALyzer:FILE?
Description Query the record file currently opened.
Return Format When valid record file is currently opened, the query returns the directory of the file
currently opened, for example, C:\REC 10:test.ROF; when no valid record file is
currently opened, the query returns NULL.