RIGOL DP832A - Manual (Page 92)

RIGOL Chapter 2 Command System
2-68 DP800 Programming Guide
Command List:
 :PRESet[:APPLy]
 :PRESet:KEY
 :PRESet:USER[<n>]:SET:CURRent
 :PRESet:USER[<n>]:SET:DEFault
 :PRESet:USER[<n>]:SET:OCP
 :PRESet:USER[<n>]:SET:OTP
 :PRESet:USER[<n>]:SET:OVP
 :PRESet:USER[<n>]:SET:SURE
 :PRESet:USER[<n>]:SET:TRACk
 :PRESet:USER[<n>]:SET:VOLTage
Note: When [<n>] is omitted, the operation is performed on the user-defined setting currently selected by
default.
:PRESet[:APPLy]
Syntax :PRESet[:APPLy]
Description Restore the instrument to the default setting or recall the specified user-defined
setting.
Explanation Sending this command is equivalent to pressing Preset at the front panel, namely
recalling the default setting or the specified user-defined setting (depend on
the :PRESet:KEY command).
Related
Command
:PRESet:KEY