RIGOL DP832A - Manual (Page 119)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-95
[:SOURce[<n>]]:VOLTage:PROTection:STATe
Syntax [:SOURce[<n>]]:VOLTage:PROTection:STATe {ON|OFF}
[:SOURce[<n>]]:VOLTage:PROTection:STATe?
Description Enable or disable the overvoltage protection (OVP) function of the specified
channel.
Query the status of the overvoltage protection (OVP) function of the specified
channel.
Parameter Name Type Range Default
[<n>] Integer 1|2|3 1
{ON|OFF} Bool ON|OFF OFF
Explanation  When the overvoltage protection function of the specified channel is enabled
( [:SOURce[<n>]]:VOLTage:PROTection:STATe ), the output turns off
automatically when the output voltage exceeds the overvoltage protection limit
currently set. You can send the
[:SOURce[<n>]]:VOLTage:PROTection:TRIPped? command to query whether
overvoltage protection occurred on the specified channel currently.
 When [:SOURce[<n>]] or [<n>] is omitted, the system sets the
corresponding parameter of the channel currently selected.
 You can also send the :OUTPut:OVP[:STATe] command to enable or disable the
OVP function of the specified channel.
 You can send the [:SOURce[<n>]]:VOLTage:PROTection[:LEVel] command to
query the current OVP value of the specified channel.
Return Format The query returns ON or OFF.
Example :VOLT:PROT:STAT ON /*Enable the OVP function of the current channel*/
:VOLT:PROT:STAT? /*Query the status of the OVP function of the current
channel and the query returns ON*/
Related
Commands
[:SOURce[<n>]]:VOLTage:PROTection:STATe
[:SOURce[<n>]]:VOLTage:PROTection:TRIPped?
:OUTPut:OVP[:STATe]
[:SOURce[<n>]]:VOLTage:PROTection[:LEVel]