RIGOL DP832A - Manual (Page 120)

RIGOL Chapter 2 Command System
2-96 DP800 Programming Guide
[:SOURce[<n>]]:VOLTage:PROTection:TRIPped?
Syntax [:SOURce[<n>]]:VOLTage:PROTection:TRIPped?
Description Query whether OVP occurred on the specified channel.
Parameter Name Type Range Default
[<n>] Integer 1|2|3 1
Explanation  OVP refers to that the output turns off automatically when the actual output
voltage of the channel exceeds the OVP value.
 When [:SOURce[<n>]] or [<n>] is omitted, the system queries whether OVP
occurred on the current channel.
 You can also send the :OUTPut:OVP:ALAR? or :OUTPut:OVP:QUES? command
to query whether OVP occurred on the specified channel.
 You can send the [:SOURce[<n>]]:VOLTage:PROTection:CLEar command to
clear the circuit and label of the OVP occurred on the specified channel.
Return Format The query returns YES or NO.
Example :VOLT:PROT:TRIP? /*Query whether OVP occurred on the current channel and
the query returns YES*/
Related
Commands
:OUTPut:OVP:ALAR?
:OUTPut:OVP:QUES?
[:SOURce[<n>]]:VOLTage:PROTection:CLEar