RIGOL DP832A - Manual (Page 161)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-137
:TIMEr:TEMPlet:MINValue
Syntax :TIMEr:TEMPlet:MINValue {<value>|MINimum|MAXimum}
:TIMEr:TEMPlet:MINValue? [MINimum|MAXimum]
Description Set the minimum voltage or current of the templet currently selected.
Query the minimum voltage or current of the templet currently selected.
Parameter Name Type Range Default
<value> Real
Voltage or current range of the
channel currently selected
0
Explanation  This command sets the minimum voltage or current (depend on
the :TIMEr:TEMPlet:OBJect command). When the editing object is voltage, this
command sets the minimum voltage; when the editing object is current, this
command sets the minimum current.
 When the Pulse templet is used, this command is used to set the low level.
Return Format The query returns the minimum voltage or current of the templet currently selected,
for example, 0.100 or 0.1000.
Example :TIME:TEMP:OBJ C,1.5 /*Set the current editing object to current and set the
voltage to 1.5V*/
:TIME:TEMP:MINV 0.1 /*Set the minimum current of the templet currently
selected to 0.1A*/
:TIME:TEMP:MINV? /*Query the minimum current of the templet currently
selected and the query returns 0.1000*/
Related
Commands
:TIMEr:TEMPlet:OBJect
:TIMEr:TEMPlet:SELect