RIGOL DP832A - Manual (Page 57)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-33
:LIC Command
The :LIC command is used to install the options and is applicable to DP831/DP832/DP821/DP811. For
DP831A/DP832A/DP821A/DP811A, the instrument is installed with the high resolution, analyzer, monitor,
LAN, RS232 and trigger options when it leaves factory and users do not need to install them.
:LIC:SET
Syntax :LIC:SET <license>
Description Install the options.
Parameter Name Type Range Default
<license> ASCII string Refer to the "Explanation" None
Explanation  To install an option, the option license is required. <license> is the option
license (for each instrument, the license is unique); the option license is a
28-byte string and can only include uppercase English letters and numbers.
 To acquire the option license, you need to order the desired option to get the
key and then generate the option license using the key following the steps
below.
 Log in the
RIGOL official website ( www.rigol.com ). Click Customer
Center  License Generate to enter the license generation interface.
 Input the correct key, serial number (press Utility  Sys Info to acquire
the serial number of the instrument) and indentifying code in the license
generation interface and click Generate to acquire the option license (the
hyphens are not included).
Example :LIC:SET UVF2L3N3XXKYTB73PPRSA4XDMSRT
Related
Command
*OPT?