Source[<n>]]:voltage[:level]:triggered[:amplitude – RIGOL DP832A User Manual
Page 116
RIGOL
2-92
DP800 Programming Guide
[:SOURce[<n>]]:VOLTage[:LEVel]:TRIGgered[:AMPLitude]
Syntax
[:SOURce[<n>]]:VOLTage[:LEVel]:TRIGgered[:AMPLitude] {<voltage>|MIN|MAX}
[:SOURce[<n>]]:VOLTage[:LEVel]:TRIGgered[:AMPLitude? {MIN|MAX}
Description
Set the trigger voltage of the specified channel.
Query the trigger voltage of the specified channel.
Parameter
Name
Type
Range
Default
[<n>]
Integer
1|2|3
1
<voltage>
Real
0 to the maximum voltage of the
specified channel
0V
Explanation
When [:SOURce[<n>]] or [<n>] is omitted, the system sets the
corresponding parameter of the channel currently selected.
When the trigger source (
) is set to "IMM" (immediate trigger), the system
executes a complete trigger operation (the voltage/current of the specified
channel change to the trigger voltage/current currently set immediately) when
When the trigger source (
) is set to "BUS" (bus trigger, namely software trigger),
the system generates a trigger by executing the
command to initialize the
trigger system. Then, the power supply executes a trigger operation (the
voltage/current of the specified channel change to the trigger voltage/current
currently set) after the specified delay time (if the delay time is
set,
).
voltage of the specified channel.
Return Format
The query returns the trigger voltage of the specified channel, for example, 1.000V.
Example
:VOLT:TRIG 1 /*Set the trigger voltage of the current channel is 1V*/
:VOLT:TRIG? /*Query the trigger voltage of the current channel and the query
returns 1.000V*/
Related
Commands
:TRIGger:IN:IMMEdiate
*TRG
:TRIGger[:SEQuence]:DELay