RIGOL DP832A - Manual (Page 50)

RIGOL Chapter 2 Command System
2-26 DP800 Programming Guide
*PSC
Syntax *PSC {0|1}
*PSC?
Description Enable or disable the function to clear the enable registers of the status byte and
standard event registers at power-on.
Query the state of the function to clear the enable registers of the status byte and
standard event registers at power-on.
Parameter Name Type Range Default
{0|1} Discrete 0|1 0
Explanation  *PSC 1 denotes clearing the enable registers of the status byte and standard
event registers at power-on; *PSC 0 denotes that the enable registers of the
status byte and standard event registers will not be affected at power-on.
 You can also send the *SRE command (*SRE 0) or *ESE command (*ESE 0) to
clear the enable registers of the status byte and standard event registers
respectively.
Return Format The query returns 0 or 1.
Example *PSC 1 /*Enable the function to clear the enable registers of the status byte and
standard event registers at power-on*/
*PSC? /*Query the setting of the power-on status clear and the query returns 1*/
Related
Commands
*SRE
*ESE
*RCL
Syntax *RCL {1|2|3|4|5|6|7|8|9|10}
Description Recall the instrument state stored in the internal memory.
Parameter Name Type Range Default
{1|2|3|4|5|6|7|8|9|10} Discrete 1|2|3|4|5|6|7|8|9|10 None
Explanation  The power supply provides 10 storage locations (numbered 1 to 10) for
instrument states. This command recalls the instrument state stored in the
specified location. Selecting number 1 to 10 can recall the instrument states
stored in the corresponding locations respectively.
 This command is only available when a state file has been stored in the
specified storage location in the internal memory.
 You can also send the :MEMory[:STATe]:LOAD or :RECAll:LOCal command to
recall the instrument state stored in the internal memory.
Related
Commands
:MEMory[:STATe]:LOAD
:RECAll:LOCal