RIGOL DP832A - Manual (Page 40)

RIGOL Chapter 2 Command System
2-16 DP800 Programming Guide
:DELAY[:STATe]
Syntax :DELAY[:STATe] {ON|OFF}
:DELAY[:STATe]?
Description Enable or disable the delay output function of the current channel.
Query the state of the delay output function of the current channel.
Parameter Name Type Range Default
{ON|OFF} Bool ON|OFF OFF
Explanation  Enabling the delayer will change the output state of the channel. Make sure
that the devices connected to the power supply will not be affected by the
change of the output status before enabling the delayer.
 The delayer parameters cannot be modified when the delayer is enabled.
 For the multi-channel models, you can send
the :INSTrument:NSELect , :INSTrument[:SELEct] or :INSTrument[:SELect]
command to switch the current channel, set the delayer parameters of the
current channel and enable or disable the delayer.
 The timer ( :TIMEr[:STATe] ) and delayer cannot be enabled at the same time.
Return Format The query returns ON or OFF.
Example :DELAY ON /*Enable the delay output*/
:DELAY? /*Query the status of the delay output and the query returns ON*/
Related
Commands
:INSTrument:NSELect
:INSTrument[:SELEct]
:INSTrument[:SELect]
:TIMEr[:STATe]
:DELAY:STATe:GEN
Syntax :DELAY:STATe:GEN {01P|10P}
:DELAY:STATe:GEN?
Description Select the pattern used when generating state automatically.
Query the pattern used when generating state automatically.
Parameter Name Type Range Default
{01P|10P} Discrete 01P|10P 01P
Explanation  01P: 0 1 pattern. The state is set to "Off" and "On" alternately.
 10P: 1 0 pattern. The state is set to "On" and "Off" alternately.
Return Format The query returns 01P or 10P.
Example :DELAY:STAT:GEN 10P /*Select 1 0 pattern*/
:DELAY:STAT:GEN? /*Query the pattern used when generating state
automatically and the query returns 10P*/