RIGOL DP832A - Manual (Page 166)

RIGOL Chapter 2 Command System
2-142 DP800 Programming Guide
:TRIGger Commands
For DP831A/DP832A/DP821A/DP811A, the instrument is installed with the trigger option when it leaves
factory and users can directly use the trigger function. For DP831/DP832/DP821/DP811, the trigger is an
optional function; to use this function, please order the corresponding option and install the option correctly
( :LIC:SET ).
Command List:
 :TRIGger:IN:CHTYpe
 :TRIGger:IN:CURRent
 :TRIGger:IN[:ENABle]
 :TRIGger:IN:IMMEdiate
 :TRIGger:IN:RESPonse
 :TRIGger:IN:SENSitivity
 :TRIGger:IN:SOURce
 :TRIGger:IN:TYPE
 :TRIGger:IN:VOLTage
 :TRIGger:OUT:CONDition
 :TRIGger:OUT:DUTY
 :TRIGger:OUT[:ENABle]
 :TRIGger:OUT:PERIod
 :TRIGger:OUT:POLArity
 :TRIGger:OUT:SIGNal
 :TRIGger:OUT:SOURce
 :TRIGger[:SEQuence]:DELay
 :TRIGger[:SEQuence]:SOURce