Sharp MX-6070N - Manual (Page 193)

2-29
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Specifying the image dimensions
1
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 2-5)
2
Tap the [Copy Ratio] key.
3
Tap the [by Size] key of the [Zoom] tab.
4
Specify the image size (dimensions of
the image to be enlarged or reduced)
and the output size (dimensions of the
enlarged and reduced images).
Tap the area of image size and output size, and enter the
sizes using the numeric keys.
After the settings are completed, tap
.
• If you have entered an incorrect size:
Tap the [C] key, and then enter the correct size.
• To cancel all settings:
Tap the [CA] key.
( 25~400 )
%
Start
Colour
Start
Preview
Others
Other Ratio by Paper by Size
1
A3 4
2-Sided Copy
Background Adjustment
Change Paper Feed Tray
Paper Select
Change Size/Direction.
Original Copy Ratio
Slightly Reduce
(3% Reduction)
XY Zoom
Auto Image
Zoom
70%
81%
86% 141%
121%
115%
100%
B4->B5
A3->A4
B5->A5
B4->A4
A4->B5
A3->B4
B5->A4
B4->A3
A5->B5
A4->B4
B5->B4
A4->A3
100
No. of copies
CA
B/W
Start
Colour
Start
Preview
2-Sided Copy
Background Adjustment
Change Paper Feed Tray
Paper Select
Change Size/Direction.
Original
Slightly Reduce
(3% Reduction)
Others A3 4
Copy Ratio
by Size
The copy ratio is calculated from specified sizes.
Enter the image size and the finished size.
Copy Ratio
Image Finished
Not Input Not Input
0 mm mm
1 No. of copies
CA
B/W
%