Sharp MX-6070N - Manual (Page 735)

7-20
SYSTEM SETTINGS►SETTING MODE LIST
*1 When an internet fax expansion kit is installed.
*2 This function is not available in some countries and regions.
Fax Data Receive/Forward (Manual)
*1 When a facsimile expansion kit is installed.
*2 When an internet fax expansion kit is installed.
Inbound Routing (Forwarding/Storing) Settings
• Internet Fax Receive Enabled No Yes
• POP3 Server – No Yes
• Port Number 110 No Yes
• POP Authentication Disabled No Yes
• User Name – No Yes
• Password – No Yes
- Change Password Disabled No Yes
• POP3 Communication Timeout 60sec. No Yes
• Reception Check Interval Setting 5 minutes No Yes
• Enable SSL Disable No Yes
‹ Default Settings No Yes
• I-Fax Own Name and Address Set No Yes
- Set I-Fax Own Name – No Yes
- Own Address – No Yes
• Direct SMTP Setting No Yes
- Port Number (Receive) 25 No Yes
- Timeout 300 seconds No Yes
- Port Number (Send) 25 No Yes
- Timeout 300 seconds No Yes
Setup Items Factory default setting U A
● Fax Data Receive/Forward (Manual) (page 7-109)
X Fax Settings *1 No Yes
‹ Receive Settings Auto Reception No Yes
X Internet Fax Settings *2 No Yes
• Manual Reception Key in Initial Screen Enabled No Yes
Setup Items Factory default setting U A
● Inbound Routing (Forwarding/Storing) Settings (page 7-110) *
X Inbound Routing Settings – No Yes
‹ Table Registration – No Yes
‹ Sender Settings for Received Data No Yes
• Receive Line Select No Yes
- Internet Fax Enabled No Yes
Setup Items Factory default setting U A