Sharp MX-6070N - Manual (Page 435)

4-32
FACSIMILE►BASIC TRANSMISSION METHODS
3
Specify the destination fax number,
and tap [Direct TX] on the action panel.
4
Specify the destination fax number.
• Entering a destination number using the numeric keys ►page 4-13
• Retrieving a destination from an address book ►page 4-14
• Using a search number to retrieve a destination ►page 4-17
• Using a transmission log to resend ►page 4-20
• Only one destination can be specified. A one-touch key in which multiple destinations are stored cannot be used.
• The destination cannot be retrieved from a global address book.
5
Tap the [Start] key to begin transmission.
If a fax transmission is already in progress when the direct transmission operation is performed, the direct transmission
will wait until the previous transmission is finished. When the previous transmission is completed, the direct transmission
will begin.
While the direct transmission is waiting, you can only check the job status.
► TYPES OF JOB STATUS SCREENS (page 1-84)
To cancel scanning the original:
Tap the [Cancel Scan] key.
Exposure
Auto
Original
Mixed Size Orig.
Resolution
Super Fine
Job Build
Original Count
Slow Scan Mode
Others
Address Fax Number
Sending History
Global Address Search
Call Search Number
Call Program
Call Registered settings
Direct TX
Verification Stamp
Scan Size
Auto Auto
reception memory
A4 A4
100%
Send Size
Preview
Speaker
Start
CA
100%
Address Book