Stamping scanned originals, Verification stamp) -93, Stamping scanned originals (verification stamp) – Sharp MX-6070N User Manual

Page 496

Advertising
background image

4-93

FACSIMILE►OTHERS FUNCTION

STAMPING SCANNED ORIGINALS (VERIFICATION STAMP)

This function stamps each original that is scanned using the automatic document feeder, allowing you to verify that all

originals were correctly scanned.

• To use the verification stamp function, the optional stamp unit must be installed.
• When 2-sided originals are used, the front of each original is stamped twice.
• If an error occurs during scanning, an original that was not scanned may be stamped.
• When the "O" mark that is stamped on originals starts to become faint, replace the stamp cartridge.

For the procedure for replacing the stamp cartridge, see "

REPLACING THE STAMP CARTRIDGE (page 1-158)

".

1

Place originals in the automatic document feeder.

AUTOMATIC DOCUMENT FEEDER (page 1-80)

2

Enter the destination fax number.

• Entering a destination number using the numeric keys

►page 4-13

• Retrieving a destination from an address book

►page 4-14

• Using a search number to retrieve a destination

►page 4-17

• Retrieving a destination from a global address book

►page 4-18

• Using a transmission log to resend

►page 4-20

3

Tap [Verification Stamp] on the action panel or [Others] key, and tap the
[Verif. Stamp] key.

The appropriate icon or checkbox is selected.
If you tap the [Others] key, tap the [Back] key after the settings have been completed.

To cancel the verification stamp setting:
Tap [Verification Stamp] on the action panel or the [Others] key, and tap [Verif. Stamp] to clear the checkmark.

4

Tap the [Start] key to start scanning of the original.

A beep will sound to indicate that scanning and transmission have ended.

When you use the automatic document feeder to scan an original, you can tap the [Preview] key to check a preview of
the image before sending a fax. For more information, see "

CHECKING THE IMAGE TO BE TRANSMITTED (page

4-30)

". However, settings for this function cannot be changed in the preview screen.

1

1

Originals

Position of verification stamp

Originals are
scanned

An "O" mark is
stamped in
fluorescent
pink.

Advertising
This manual is related to the following products: