Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 100)

100 en | Configuration | Network menu OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
The controller and the audio device are tightly coupled. Failure to communicate between the
controller and the audio device may cause unexpected results.
Audio IP Field
Use the Audio IP field to enter the IP Address used to transmit and receive audio across the
network.
By default, OMNEO interfaces use link local range addresses and are DHCP enabled. If there is
a DHCP server on the network, it takes an IP Address from the DHCP Server. The controller
and the audio device are tightly coupled and must be in the same subnet. Failure to
communicate between the controller and the audio device may cause unexpected results.
Netmask Field
Use the Netmask
field to enter the netmask address.
Gateway Field
Use the Gateway field to enter the gateway address, if applicable.
DNS Server Field
Use the DNS Server field to enter the DNS server address for the OMNEO interface.
Device Field
Use the Device field to enter the name of the OMS device used by other OMNEO devices.
Domain Field
Use the Domain field to enter the domain in which OMNEO resides. Leave this field blank if
multiple domains are not used. This implies the .local domain is used.
i
Notice!
It is necessary to enter a DNS server address when providing a domain.
Use Static Check Box
Select the Use Static check box to determine whether the IP address for the OMNEO interface
is fixed and manually entered.
Use RSTP Check Box
Select the Use RSTP check box to determine whether RSTP is used on the port. See RSTP,
page 67.
21.3 RVON
Use the RVON screen to configure the RVON network interface.
Figure 21.4: Configuration | Network | RVON
IP Address Field
Use the IP Address field to enter the IP address of the RVON Port interface.
i
Notice!
The RVON Port can be on a different network from the OMNEO and Control Port interfaces.