Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 104)

104 en | Configuration | Ports menu OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
IP Address Field
Use the IP Address field to enter the IP address of the RVON device to which this port should
connect.
Codec Field
Use the Codec field to select the codec type for the RVON port.
Available options for this field is G.711a, G.711µ, G.722, and G.729A.
Device Type Field
Use the Device Type field to select the type of RVON device connected to the port.
Packet Size Field
Use the Packet Size field to select the size of each audio packet. The packet size depends on
the codec selected.
Available options for G.711a, G.711µ, G.722 - 10 ms, 20 ms, and 30 ms; for G.729A - 10 ms, 20
ms, 40 ms, and 60 ms.
Channel Field
Use the Channel field to select the channel number on the device to which this port is
connected.
VAD Field
Use the VAD field to select the threshold at which point audio transmits across the network.
The range for this field is -60 dBm to -30 dBm, or Off.
Description Field
Use the Description field to enter a description for the channel.
22.4 2-Wire ports
Figure 22.8: Configuration | Ports | 2-Wire
XLR Field
The XLR field displays the four 2-Wire channels (CH A, CH B, CH C, and CH D).
Port Field
The Port field displays the port and alpha assigned to the 2W channel.
Changes cannot be made to this field.
Mode Field
Use the Mode field to select the channel operation mode.
Available options are:
Off
Audiocom Balanced Audio, shared power and audio
Clear-Com Unbalanced, separate power and audio
RTS1 CH 1 Unbalanced, shared power and audio
RTS2 CH 2 Unbalanced, shared power and audio
Balanced and unbalanced refer to the type of audio signal being used.