Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 53)

OMS OMNEO Main Station Basic operation | en 53
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
Authentication Use the Authentication menu
item to select different areas of
the OMS device to configure
security. See
Authentication
menu, page 128.
AZedit Use the AZedit menu item to
restrict access to AZedit. See
AZedit, page 128.
IPedit Use the IPedit menu item to
restrict access to IPedit. See
IPedit, page 129.
Front Panel Use the Front Panel menu item
to configure access restrictions
for the front panel. See
Front
panel, page 129.
Debug Shell Use the Debug Shell menu item
to access the debug shell
authentication form. This form is
used to restrict access to the
debug shell. See
Debug Shell,
page 131.
GPIO-16 Use the GPIO-16 menu item to
configure connections to
GPIO-16 devices. See
GPIO-16
menu, page 131.
Clock Select Use the Clock Select menu item
to configure options for audio
clock synchronization for OMNEO
devices. See
Clock Select, page
131.
Soft Reset Use the Soft Reset menu item to
perform a soft reset on the
frame. See
Soft Reset, page 132.
Diagnostics Use the Diagnostics menu to
select test panel mode. See
Diagnostics, page 132.
Test Panel Use the Test Panel menu item to
verify that all buttons, keys, and
knobs on the front panel function
properly. See
Test Panel, page
132.