Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 121)

OMS OMNEO Main Station Configuration | Local Keypanel menu | en 121
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
unlatched when the footswitch releases. In this mode, the footswitch is a one-time operation.
Pressing the footswitch turns the keys on and releasing the footswitch turns the keys off,
unlatching them so the keys are unable to come on again with the next press of the
footswitch. To use the footswitch again, the desired keys must be re-latched.
A footswitch is a foot-triggered switch used to activate keypanel keys. OMS provides two
methods for activating the footswitch feature:
–
Opto-isolated input #1 on the GPIO terminal block, located on the rear panel.
Figure 24.7: Footswitch Cabling
– Pin 6 on the headset connector.
By default, the footswitch is disabled.
Figure 24.8: Configuration | Local Keypanel | Footswitch Screen
Enable Footswitch Check Box
The Enable Footswitch check box determines whether to enable the footswitch for the
device.
Unlatch Keys on Release Check Box
The Unlatch Keys on Release check box determines whether latched talk keys become
unlatched when the user releases the footswitch.
24.7 Display Options
Use the Display Options page to configure panel volume and listen assignment display
options.
Figure 24.9: Configuration | Local Keypanel | Display Options Screen
Show Panel Volume Check Box
The Show Panel Volume check box determines whether the speaker/headset volume window
permanently displays, otherwise the window only appears when adjusting the volume.