Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 32)

32 en | Intercom configuration OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
5. Navigate to the RVON icon .
6. Click the ENC2 encoder knob .
The RVON Channels screen displays.
7. Navigate to the Port field .
8. Click the ENC2 encoder knob .
The field becomes active.
9. Scroll to the desired port .
10. Click the ENC2 encoder knob .
The field is changed.
11. Navigate to the IP Address field .
12. Click the ENC2 encoder knob .
The field becomes active.
13. Enter the IP Address of the partner device to connect to this port.
14. Click the ENC2 encoder knob .
The field turns yellow (modification made, but not confirmed).
15. Navigate to the Codec field .
16. Click the ENC2 encoder knob .
The field becomes active.
17. Select the codec to use.
18. Click the ENC2 encoder knob .
The field turns yellow (modification made, but not confirmed).
19. Navigate to the Device Type field .
20. Click the ENC2 encoder knob .
The field becomes active.
21. Scroll to the RVON device type of the partner device.
22. Click the ENC2 encoder knob .
The field turns yellow (modification made, but not confirmed).
23. Navigate to the Packet Size field .
24. Click the ENC2 encoder knob .
The field becomes active.
25. Select the packet size to use.
26. Click the ENC2 encoder knob .
The field turns yellow (modification made, but not confirmed).
27. Navigate to the channel field .
28. Click the ENC2 encoder knob .
The field becomes active.
29. Scroll to the Channel on the partner device .
30. Click the ENC2 encoder knob .
The field turns yellow (modification made, but not confirmed).
31. Navigate to the VAD field .
32. Click the ENC2 encoder knob .
The field becomes active.