Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 143)

OMS OMNEO Main Station Intercom setup | Devices menu | en 143
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
Latch Disable Check Box
The Latch Disable check box determines whether the selected device, when assigned to a key,
causes the key to become latch disabled. Override this by clearing the latch disable for the key
after the assignment is made.
To
configure scroll enables , do the following:
1. Navigate to the Port field .
2. Click the ENC2 encoder knob .
The field becomes active.
3. Select the desired port .
4. Click the ENC2 encoder knob .
5. Navigate to the Scroll Enable check box .
6. Click the ENC2 encoder knob to enable or disable scroll enables .
7. Navigate to the Latch Disable check box .
8. Click the ENC2 encoder knob to enable or disable latch disable .
9. Click the ENC1 encoder knob to exit the menu .
A Changes Made confirmation message appears.
10. Navigate to the desired action .
11. Click the ENC2 encoder to confirm the selection .