Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 14)

14 en | Keypad reference view OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
5 Keypad reference view
There are three modes of operation for the keypanel keypad: Primary Mode and SHIFT Mode
(DIAL mode is a secondary function of SHIFT Mode).
Figure 5.1: OMS Keypad
Primary Mode
Use primary mode for the most common keypanel functions, such as CLR, SEL, and accessing
the Main menu. There are no special keypad sequences to use these functions.
SHIFT Mode
Use SHIFT mode to access more utilities on the keypad. When the keypad is in SHIFT mode,
pressing the keypad keys perform secondary functions. The SHIFT mode functions are located
on the keypad keys. The SHIFT functions available: DROP, DIAL, PAGE, CWCL, MKILL, INFO,
SA, UPG, and ALL C.
To
access SHIFT mode ,
1. Press the SHIFT button .
2. Press the secondary function desired.
i
Notice!
Once SHIFT mode is entered, exit the mode by pressing the SHIFT key again, without pressing
any other keys. It also exits after a timeout.
i
Notice!
When SHIFT + <keypad key> appears in this manual, the user is instructed to press the SHIFT
key followed by the next keypad key. The SHIFT key and the keypad key should not be
pressed simultaneously.
If the user is instructed to press two keys simultaneously, this manual uses the phrase
press
and hold .
DIAL Mode
Use DIAL mode to complete telephone operations. When the OMS is in DIAL mode, the
keypad keys support the standard telephone keypad configuration as a third tier function. The
DTMF keypad is in the upper-left corner of the keypad keys.
To
access DIAL mode , do the following:
1. Press the SHIFT key .
2. Press the DIAL key .
3. Press and hold one of the OMS talk buttons .
4. While holding the talk button, enter the phone number using the keypad .
5. Release the talk button when the phone number is entered.