Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 151)

OMS OMNEO Main Station Intercom setup | Gains menu | en 151
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
13. Click the ENC1 encoder knob to exit the screen .
A Changes Made message appears.
14. Navigate to the desired action .
15. Click the ENC2 encoder knob to confirm the selection .
31.2 Crosspoint
Use the Crosspoint Gains screen to configure individual gain levels for crosspoints within the
intercom system. Crosspoint gain adjustments adjust the level between two specific intercom
ports.
Figure 31.3: Intercom Setup | Gains | Crosspoint
Port Field
Use the Port field to select the desired output port’s crosspoint listen gains to view or modify.
Listening To Field
Use the Listening To field to select the input port to which the selected output port is
listening.
Crosspoint Gain Field
Use the Crosspoint Gain field to select the gain at which the selected port hears the selected
input port.
The range for this field is -80 dB to +6.0 dB, and Mute.
To
adjust the crosspoint gain , do the following:
1. Navigate to the Port field .
2. Click the ENC2 encoder knob .
The field becomes active.
3. Select the desired port .
4. Click the ENC2 encoder knob to confirm .
5. Navigate to the Listening To field .
6. Click the ENC2 encoder knob .
The field becomes active.
7. Select the desired listening to port .
8. Click the ENC2 encoder knob to confirm .
9. Navigate to the Crosspoint Gain field .
10. Click the ENC2 encoder knob .
The field becomes active.
11. Select the desired crosspoint gain amount .
12. Click the ENC2 encoder knob to confirm .
13. Click the ENC1 encoder knob to exit the screen .
A Changes Made message appears.
14. Navigate to the desired action .
15. Click the ENC2 encoder knob to confirm the selection .
31.3 Party line
Use the Party Line screen to set the gain level for ports listening to party lines.