Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 153)

OMS OMNEO Main Station Intercom Setup | Alphas menu | en 153
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
32 Intercom Setup | Alphas menu
Figure 32.1: Intercom Setup | Alphas Menu
Use the Alphas menu to view and modify the alphas for key assignment resource types.
Configurable assignment types are Ports, Party Lines, IFBs, Special Lists, Relays, and ISOs.
Alpha modifications change the current alpha size, plus all larger sizes where that alpha is the
same as the currently modified alpha. For example, the 4-character alpha TEST, the 6-
character alpha is TEST, and the 8-character alpha is SEAN. Changes made to the 4-character
alpha are made to the 6-character alpha, but not to the 8-character alpha.
Available options are:
4 Character
6 Character
8 Character
8 Unicode
32.1 Alphas
Figure 32.2: Intercom Setup | Alphas | Port
Port Field
The Port field is used to select the port for which to configure Alpha text.
4 Character Field
The 4 Character field is used to enter a four character alpha.
6 Character Field
The 6-Character field is used to enter a six character alpha.
8 Character Field
The 8 Character field is used to enter an eight character alpha.
8 Unicode Field
The 8 Unicode field displays the eight character Unicode port alpha.
Changes cannot be made to this field.
To
configure the alpha size , do the following:
1. Navigate to the desired assignment type .
2. Click the ENC2 encoder knob .
The Alpha Configuration form displays.
3. Navigate to the Port field .
4. Click the ENC2 encoder knob .
The Port field becomes active.
5. Scroll to the port desired.