Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 15)

OMS OMNEO Main Station Keypad reference view | en 15
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
Keypad Mode Dial Mode Shift Mode Description
MUTE 1 The MUTE button mutes the panel microphone,
headset microphone or both at the same time.
The microphone mute operation can be
configured as momentary, toggle or disabled.
↑ 2 UPG Use the UP button to navigate through menus.
Use the UPG (User Programmable) function to
configure changes to panel swap rows.
ALL T 3 ALL C The ALL T button activates the talk on every
party line assignment across every row of talk
buttons.
The ALL C button sends a call to every party line
assignment across every row of listen buttons.
Devices that are members of those party lines
receive a notification. Notification types are a
combination of visual, audible or haptic
vibration.
← 4 MKILL Use the LEFT button to navigate through menus.
The MKILL function sends a mic kill command to
other devices in the system. For every party line
the OMS is talking to, the mic kill command is
sent to all devices that are members of those
party lines.
MENU 5 INFO The MENU button accesses the top-level OMS
main menu.
The INFO function shows the port status
overview screen.
→ 6 SA Use the RIGHT button to navigate through
menus.
Use the SA function to activate a voice page,
where the audio is routed to a public address
system connected to the SA output so
announcements can be made to many users
simultaneously.
MICSEL 7 Use the MICSEL button to switch between panel
mic mode or headset mode.
↓ 8 PAGE Use the DOWN button to navigate through
menus.
Use the PAGE function to access a different
setup page. There are four setup pages.
CWTLK 9 CWCL Use the CWTLK button to answer a call in the
CWW window.
Use the CWCL button to clear a call entry in the
window, or to open the window when it is
closed.