Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 33)

OMS OMNEO Main Station Intercom configuration | en 33
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
33. Select the VAD threshold level to use or to Off .
34. Click the ENC2 encoder knob .
The field turns yellow (modification made, but not confirmed).
35. (Optional) Enter a description for this port connection .
36. Click the ENC1 encoder knob to exit the screen.
A Changes Made confirmation message displays.
1. Navigate to the desired action .
2. Click the ENC2 encoder knob to confirm .
i
Notice!
Alternately, click the ENC1 encoder knob or press the CLR button to cancel this prompt and
go back to editing on the underlying screen (for example, if the user is not ready to Save or
Discard the modifications).
9.1.6 Add devices to the device catalog in IPedit
i
Notice!
Applicable for Analog Plus, Basic, Intermediate, and Advanced models.
To add an OMS to IPedit , do the following:
1. Open IPedit .
2. Select Add from the Device menu .
The Add Devices screen displays.