Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 64)

64 en | Basic operation OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
The mic kill function does not work on Clear-Com analog beltpacks.
For information on disabling mic kill, please reference
Keypad hotkeys, page 126.
To use mic kill , do the following:
1. Enable the Party Line Talk button on the party line intended to receive the mic kill signal.
i
Notice!
Press multiple PL talk keys to send a signal to multiple party lines.
2. Press the SHIFT button .
3. Press the MKILL button .
A mic kill icon appears in the panel display.
Mic Kill All
A Mic Kill All executes the mic kill command for all party lines on any of the OMS keys
(including virtual keys). For a mic kill all, the talk button does not need to be enabled.
To
use mic kill all , do the following:
1. Enable the Party Line Talk button on the party line intended to receive the mic kill signal.
i
Notice!
Press multiple PL talk keys to send a signal to multiple party lines.
2. Press the SHIFT button .
3. Press the MKILL button .
A mic kill icon appears in the panel display.
4. Press the SHIFT button .
5. Press the ALL T button within three seconds.
Refer to
– Keypad hotkeys, page 126
10.12 Info button
The INFO button provides basic information on OMS such as Port Status and Link Status.
For more information on Port Status, please reference Port status overview, page 58.
For more information on Link Status, please reference Link status overview, page 59.
To display INFO , do the following:
1. Press the SHIFT button .
2. Press the INFO button . The screen shows Port Status.
3. Press the INFO button. The screen shows Link Status.
4. Press CLR to exit.
Refer to
– Port status overview, page 58
– Link status overview, page 59