Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 95)

OMS OMNEO Main Station Status | Hardware menu | en 95
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
Max Field
The Max field displays the maximum current recorded on the power supply.
This value resets at reboot.
18.2 Temperatures
The Temperatures menu item displays temperature readings for different components inside
the device. The device has nine sensors that self-monitor across the board. If the
temperatures are outside the recommended operating conditions, an alarm generates.
–
If the temperature is within the normal operating range, the entry shows in green
(Normal).
– If the temperature is outside the normal operating range, but not in the alarm state, the
entry shows in yellow (Marginal).
– If the temperature is outside the marginal operating range, the value shows in red
(Alarm).
i
Notice!
This information is for diagnostic purposes only.
Figure 18.3: Status | Hardware | Temperatures Screen
Sensor Field
The Sensor field displays the names of the different temperature sensors monitored on the
device.
Temperature Field
The Temperature field displays the current temperature of the specific sensor. Temperatures
only show in Celsius.
Min Field
The Min field displays the lowest recorded temperatures of the sensor from the time the
device powers on.
Max Field
The Max field displays the highest recorded temperature of the sensor from the time the
device powers on.