Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 141)

OMS OMNEO Main Station Intercom setup | Devices menu | en 141
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
Latch Disable Check Box
The Latch Disable check box indicates the keypanel user cannot latch on the key. Clear the
check box to enable latching capabilities. When Latching is enabled, the talk function stays on
after the talk key is pressed briefly. Otherwise, the talk function only works when the button is
pressed.
i
Notice!
A key only latches when pressed and released within 0.5 seconds. Otherwise, the key always
turns off.
Key Restrict Check Box
The Key Restrict check box indicates the device key is restricted and modifications are
disabled. Use this option to prevent a user from changing the key assignment.
To
change key assignments , do the following:
1. Navigate the Port field .
2. Click the ENC2 encoder knob .
3. Turn the ENC2 encoder knob to select the port.
4. Click the ENC2 encoder knob to confirm the selection.
5. Navigate to the Type field .
6. Click the ENC2 encoder knob .
The field becomes active.
7. Rotate the ENC2 encoder knob to select the new assignment.
8. Click the ENC2 encoder knob to confirm the selection.
9. Click the ENC1 encoder knob to exit the screen.
A Changes Made confirmation message displays,
10. Navigate to the desired action .
11. Click the ENC2 encoder knob to confirm the selection.
29.2 Setup pages
Setup pages gives access to more key assignments than physical keys on the device. This is
useful for sharing a device because setup pages can be used to swap between the key
assignments used for each person.
Up to 4 setup pages per keypanel, port can be configured.
Figure 29.3: Intercom Setup | Devices | Setup Pages
Port Field
Use the Port field to select the desired port for the setup page assignment.
Setup Restrict Check Box
The Setup Restrict check box indicates the user is restricted from changing the setup pages.