Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 34)

34 en | Intercom configuration OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
3. Select one or more available devices .
The Add button becomes active.
i
Notice!
OMS (OMNEO) and OMS-R (RVON) device types are shown as separate devices in IPedit. The
OMNEO and RVON interfaces may be on the same network (in which case IPedit can talk to
both devices at the same time) or, the network interfaces may be on separate networks (in
which case, an IPedit session needs to be run on each network and each session sees either
OMS or OMS-R, but not both), unless the PC has two network cards (one on each network)
or the two networks are routable via a gateway.
4. Click the Add button .
The selected devices display in the device catalog.
5. Click the Done button .
The screen closes.
9.1.7 Configure an OMNEO channel for OMS using IPedit
Get the latest version of IPedit at http://www.rtsintercoms.com/ .
i
Notice!
Applicable for Analog Plus, Basic, Intermediate, and Advanced models.
To configure OMS using IPedit , do the following:
i
Notice!
The Destination Type does not need to be selected if using the Browse window to select the
device. It fills the type and IP Address automatically.
Using the Channel Configuration Pane