Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 134)

134 en | Intercom setup | Party line membership OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
27 Intercom setup | Party line membership
Use Intercom setup to configure party line memberships, stored setups, devices, intercom
resources, gains, and alphas.
i
Notice!
Changes made to the front panel settings save to flash immediately. However, it can take up
to five minutes for changes made to the Intercom Setup to take effect.
Figure 27.1: Intercom | Setup Menu Icons
Party Line Membership
Use the Party Line Membership menu item to configure groups of devices that need to
communicate simultaneously. Typically, party line audio is full duplex; meaning transmit and
receive occur at the same time.
All ports can be members of a single party line.
Figure 27.2: Party line membership screen
Depending on the OMS model, the number of party lines and the type of ports may differ.
The possible port types are:
– 40 OMNEO ports – 4 Two-Wire ports
– 4 RVON ports – 2 PGM ports
– 4 AIO ports – 1 SA port
– 1 OMS port – 8 TIE ports
Keys View
Use the Keys View to assign party line memberships to the different keys of the device.
Different key states can occur when assigning keys in the Keys View.
Key State Description
White outline The assignment will be added
Red outline The assignment will be deleted.
Blinking The current assignment (which is about to be deleted) and the proposed
new assignment (which takes the place of the current assignment).
1
When blinking:
–
The current assignment is shaded darker
– The proposed new assignment is shown in the unshaded color.