Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 150)

150 en | Intercom setup | Gains menu OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
31 Intercom setup | Gains menu
Use the Gains menu to set I/O gains, crosspoint gains, and party line gains.
Figure 31.1: Intercom Setup | Gains Menu Icons
31.1 I/O
Use the I/O screen to configure input and output gain for selected ports in the intercom
system. When an intercom port interfaces with an external device operating at a different
audio level than the intercom system, input and output gain adjustments are made to align the
audio levels.
Figure 31.2: Intercom Setup | Gains | I/O
Port Field
Use the Port field to select the desired port’s gain to view or modify.
Input Gain Field
Use the Input Gain field to set the amount of gain, in dB, applied to the selected port’s input
audio.
The range for this field is +20 dB to -20 dB.
Output Gain Field
Use the Output Gain field to set the amount of gain, in dB, applied to the selected port’s
output audio.
The range for this field is +20 dB to -20 dB.
To
adjust the I/O gain , do the following:
1. Navigate to the Port field .
2. Click the ENC2 encoder knob .
The field becomes active.
3. Select the desired port .
4. Click the ENC2 encoder knob to confirm .
5. Navigate to the Input Gain field .
6. Click the ENC2 encoder knob .
The field becomes active.
7. Select the desired input gain amount .
8. Click the ENC2 encoder knob to confirm .
9. Navigate to the Output Gain field .
10. Click the ENC2 encoder knob .
The field becomes active.
11. Select the desired output gain amount .
12. Click the ENC2 encoder knob to confirm .