Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 27)

OMS OMNEO Main Station System configuration | en 27
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
8.4 Configure the RVON interface
To configure the RVON interface from the front panel , do the following:
1. Navigate to the RVON icon .
2. Click the ENC2 encoder knob .
The RVON Configuration screen displays.
3. Enter the IP address of the RVON interface.
4. Enter the Netmask address for the RVON interface.
5. Enter the Gateway address for the RVON interface, if applicable.
6. Click the ENC1 encoder knob to exit.
A confirmation to save or discard changes appears.
7. Rotate the ENC2 encoder knob to the desired action .
8. Click the ENC2 encoder knob to confirm .