Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 85)

OMS OMNEO Main Station Status | Ports menu | en 85
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
15 Status | Ports menu
Use the Ports menu to view port status for the following port and device types:
OMNEO
RVON
AIO
2-Wire
Devices
TIF
Figure 15.1: Status | Ports | Menu Icons
15.1 OMNEO
The OMNEO screen displays the status for OMNEO ports.
Figure 15.2: Status | Ports | OMNEO
Port Field
The Port field shows the port alpha and the port number.
Device Name Field
The Device Name field displays the name of the device to which this port is configured to
connect.
i
Notice!
The device name always populates the field, unless the device connected to the port is a third
party Dante device.
Connected Field
The Connected field is used to view the state of the connection. Typical states are Idle and
Connected; however there can be transitional states during connection setup and tear down.
The connection states available are Connected and Idle.
Duration Field
The Duration field is used to view the duration of the connection.
This field is displayed in days and hh:mm:ss (for example, 3 days 02:32:23).