Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 87)

OMS OMNEO Main Station Status | Ports menu | en 87
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
Channel Field
The Channel field displays the channel number on the device to which this port is connected.
VAD Field
The VAD (Voice Activity Detection) field displays the threshold at which point audio transmits
across the network.
Description Field
The Description field displays the description of the channel.
Drops Field
The Drops field displays the number of times an interruption in the connection occurs.
15.3 AIO
The AIO screen is used to displays the AIO port status, which includes keypanel status and
communication error counters.
Figure 15.4: Status | Ports | AIO Screen
AIO Column
The AIO column displays the number of the physical AIO connector located on the back of the
device.
Port Field
The Port field shows the port alpha and the port number.
Status Field
The Status field displays the connection status.
Available statuses are:
The panel is connected
The panel was connected, but is no longer connected.
There is no connection.
Errors To / From Field
The Errors To / From field displays the number of errors that have occurred in sending and
receiving messages via the AIO port.
BER To / From Field
The BER (Burst Error Rate) To / From field displays the number of errors that have occurred
in the last 10 minutes, when sending or receiving messages via the AIO port. If the intercom
has been running less than 10 minutes, it prorates the number of errors that would occur in a
10 minute period at the same rate. For example, three errors in five minutes would be shown
as a BER of 6.
The maximum displayed BER value is 255.