Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 118)

118 en | Configuration | Local Keypanel menu OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
6. Click the ENC2 encoder knob .
7. Turn the ENC2 encoder knob to move the focus to Exclusive.
8. Click the ENC2 encoder knob .
9. Tap the desired talk key to assign the exclusive assignment.
The key tile highlights with a red bar indicating which key is configured with the exclusive
key option.
Auto Dial
Auto Dial
stores commonly used phone numbers in the auto dial list locally on the device.
You can configure 1-Touch TIF Auto Dial numbers and configure those saved numbers to a
device key. Once configured, pressing the assigned key causes the TIF to go off-hook and auto
dial the configured number.
To
assign an auto dial to a device key , do the following:
1. Navigate to the Configuration icon .
2. Click the ENC2 encoder knob .
3. Navigate to the Local Keypanel icon .
4. Click the ENC2 encoder knob .
5. Navigate to the Key Options icon .
6. Click the ENC2 encoder knob .
7. Turn the ENC2 encoder knob to move the focus to Auto Dial.
8. Click the ENC2 encoder knob .
9. Tap the desired talk key to assign the auto dial assignment.
10. Turn the ENC2 encoder knob or press the up arrow key to select the desired auto dial.
The key tile highlights with a red bar indicating which key is configured with an auto dial
number.
24.2 Auto dial
Auto dial stores commonly used phone number in the auto dial list locally on the device.
To configure a key on the device to have an auto dial number, refer to Key options, page 117.
Figure 24.3: Configuration | Local Keypanel | Auto Dial Screen
Slot Field
Use the Slot field to select the entry number for the auto dial number. This number does not
need to follow sequence.
Number Field
Use the Number field to enter a phone number to assign as an auto dial.
The device allows up to 100 auto dial entries.
To
store an auto dial number , do the following:
1. Navigate to the Configuration icon .
2. Click the ENC2 encoder knob .
3. Navigate to Local Keypanel .
4. Click the ENC2 encoder knob .
5. Navigate to Auto Dial .
6. Click the ENC2 encoder knob .
7. Turn the ENC2 encoder knob or press the up arrow key on the keypad to select the
desired slot.