Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 31)

OMS OMNEO Main Station Intercom configuration | en 31
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
7. Navigate to the Port field .
8. Click the ENC2 encoder knob .
The field becomes active.
9. Scroll to the desired port .
10. Click the ENC2 encoder knob .
The field is changed.
11. Navigate to the Device Name field .
12. Click the ENC2 encoder knob .
The field becomes active.
13. Enter the device name of the partner device to connect to this port.
14. Click the ENC2 encoder knob .
The field turns yellow (modification made, but not confirmed).
15. Navigate to the Device Type field .
16. Click the ENC2 encoder knob .
The field becomes active.
17. Scroll to the OMNEO device type of the partner device.
18. Click the ENC2 encoder knob .
The field turns yellow (modification made, but not confirmed).
19. Navigate to the channel field .
20. Click the ENC2 encoder knob .
The field becomes active.
21. Scroll to the desired channel on the partner device.
22. Click the ENC2 encoder knob .
The field turns yellow (modification made, but not confirmed).
23. (Optional) Enter a description for this connection.
24. (Optional) Select the latency to use for this connection. (1 ms is recommended for best
quality, except for DBP. DBP needs 2 ms latency).
25. Click the ENC1 encoder knob to exit the screen.
A Changes Made confirmation message displays.
26. Navigate to the desired action .
27. Click the ENC2 encoder knob to confirm the selection .
9.1.5 Connect RVON devices to OMS
i
Notice!
Applicable for Advanced model only.
To connect RVON devices to OMS , do the following:
1. Navigate to the Configuration icon .
2. Click the ENC2 encoder knob .
The Configuration menu appears.
3. Navigate to the Ports icon .
4. Click the ENC2 encoder knob .
The Ports menu displays.