Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 28)

28 en | Intercom configuration OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
9 Intercom configuration
9.1 Port configuration
9.1.1 Connect 2-Wire devices to OMS
i
Notice!
Applicable for Analog, Analog Plus, Intermediate, and Advanced models.
To connect a 2-Wire device to OMS , do the following:
1. Navigate to the Configuration icon .
2. Click the ENC2 encoder knob .
The Configuration menu displays.
3. Navigate to the Ports icon .
4. Click the ENC2 encoder knob .
The Ports menu displays.
5. Navigate to the 2-Wire icon .
6. Click the ENC2 encoder knob .
The 2-Wire Ports screen displays.
7. Navigate to the Mode field .
8. Click the ENC2 encoder knob .
The Mode field becomes active.
9. Select the desired mode .
10. Press the ENC2 encoder knob .
11. Navigate to the Loop field . (Optional)
Modifications cannot be made to RTS 1 and RTS 2 modes.
12. Click the ENC2 encoder knob .
The field is immediately toggled.
13. Navigate to the Auto-Mute field . (Optional)
14. Click the ENC2 encoder knob .
The field is immediately toggled.