Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 145)

OMS OMNEO Main Station Intercom setup | Resources menu | en 145
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
2. Click the ENC2 encoder knob .
The field becomes active.
3. Select the desired party line .
4. Click the ENC2 encoder knob to confirm .
5. Navigate to the Scroll Enable check box .
6. Click the ENC2 encoder knob to enable or disable scroll enable .
7. Navigate to the Port field .
8. Click the ENC2 encoder knob .
The field becomes active.
9. Select the desired port .
10. Click the ENC2 encoder knob to confirm .
11. Navigate to the Latch Disable check box .
12. (Optional) Click the ENC2 encoder knob to enable or disable latch disable .
13. Navigate to the Talker check box .
14. (Optional) Click the ENC2 encoder knob to enable the party line as talker .
15. Navigate to the Listener check box .
16. (Optional) Click the ENC2 encoder knob to enable the party line as listener .
17. Navigate to the Tally Enable check box .
18. (Optional) Click the ENC2 encoder knob to enable tallies for the party line .
19. Click the ENC1 encoder knob to exit the screen .
A Changes Made message appears.
20. Navigate to the desired action .
21. Click the ENC2 encoder knob to confirm the selection .
30.2 IFB
Use the IFB screen to configure IFB definitions and options. IFB (Interrupted Fold Back) is a
system in which there is one-way communication from a director to on-air talent or a remote
location. An example of an IFB system is a remote reporter needs to hear the news feed to
know their cue to report and a director needs to interrupt the news feed to tell the reporter
information, such as how much time is left before commercial break.
Figure 30.3: Intercom Setup | Resources | IFB
IFB Field
Use the IFB field to select the desired IFB to configure.
Input Field
Use the Input field to select the IFB program input port. The program input always routes to
the IFB output (except when interrupting the IFB).
Output Field
Use the Output field to select the IFB output port. The IFB Output is the audio heard by the
talent. Audio from the input port (typically, program input audio) is routed to this output port,
except when the IFB is interrupted.