5 options, Options – Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) User Manual

Page 125

Advertising
background image

OMS OMNEO Main Station

Configuration | User Preferences menu | en

125

Bosch Security Systems, LLC

Technical Manual

01-2021 | 03 | F.01U.380.820

Always Inactive

The keypad backlight is always in the inactive state. When
selected, the LED color/brightness does not change when
SHIFT is pressed, even if the keypanel is in SHIFT mode.

i

Notice!

When the front panel menu is not active, the backlight stays lit for 5 seconds of inactivity
before returning to the inactive state. However, when the front panel menu is active, the
backlight stays lit for one minute before exiting the menu system and returning to the inactive
state.

Inactive State LED Color Field

Use the

Inactive State LED Color

field to select the LED backlight color when the keypad is in

the inactive state.
Available options are Blue and White (default).

Active State LED Color Field

Use the

Active State LED Color

field to select the LED backlight color when the keypad is in

the active state.
Available options are Blue and White (default).

Shift State LED Color Field

Use the

Shift State LED Color

field to select the LED backlight color when the keypad is in the

Shift state.
Available options are Blue (default) and White.

LED Brightness Field

Use the

LED Brightness

field to set the brightness of the keypad backlight LEDs.

Brightness ranges from 0% to 100%.
By default, brightness is set for 30% for the Inactive state; and 100% for the Active and Shift
states.

25.5

Options

Use the

Options

screen to configure advanced user interface options.

Figure 25.6:

Configuration | User Interface | Options

Show Alarm Popups Check Box

The

Show Alarm Popups

check box determines whether popup messages display when alarms

trigger.
By default, Show Alarm Popups is enabled.

Show Progress Popups Check Box

The

Show Progress Popups

check box determines whether progress bars display on the front

panel when writing new firmware, fonts, or resources to the intercom.
By default, Show Progress Popups is enabled.

Auto-Hide Scroll Bars Check Box

The

Auto-Hide Scroll Bars

check box determines whether a scroll bar shown on the right side

of some screens auto-hides after a few seconds or if it is always visible.

Advertising