Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 119)

OMS OMNEO Main Station Configuration | Local Keypanel menu | en 119
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
8. Click the ENC2 encoder knob .
9. Turn the ENC2 encoder knob to move the focus to the Number field.
10. Click the ENC2 encoder knob .
11. Enter the desired phone number .
12. Click the ENC2 encoder knob .
13. Click the ENC1 encoder knob .
14. With the Save option highlighted, click the ENC2 encoder knob .
24.3 Panel Swap
Panel Swap gives users the ability to quickly access up to 16 virtual keys, allowing them to
easily communicate with more people. Panel swap is different from changing setup pages
because the keys can stay active even when they are no longer visible on the main display.
When Panel Swap is enabled, users can switch to different key rows. With four key rows and
each key row supporting four keys, there are 16 virtual keys. Turn the ENC1 encoder knob to
change the active key row. Panel swap can also be activated by (or triggered by) a UPG key.
Figure 24.4: Configuration | Local Keypanel | Panel Swap Screen
# of Key Rows Field
Use the # of Key Rows field to select the number of key rows necessary.
Key States Field
Use the Key States field to define what happens to the key states when a row of keys is not
currently visible. There are two possible modes of operation:
Force Off Talk and listen are forced off when the row of keys is not visible.
Retain Talk and listen key states are retained when the row of keys is not visible, the
following icon shows in the panel display when a virtual key is active on a key
row not currently shown in the display.
Keypad UPG Field
Use the Keypad UPG field to select what panel swap action occurs. There are four actions
available:
Cycle To Cycle to the next or previous key row.
Switch To Switch to a specific key row.
Toggle To Toggle between key row 1 and another key row.
Unassigned UPG does not control key row changes.
24.4 Page Change
Use the Page Change screen to set the action of setup pages while talk keys are active.