10 configure an rvon keypanel to connect to oms, Configure an rvon keypanel to connect to oms – Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) User Manual
Page 37
OMS OMNEO Main Station
Intercom configuration | en
37
Bosch Security Systems, LLC
Technical Manual
01-2021 | 03 | F.01U.380.820
1.
Select the
destination device type
.
2.
Enter the
IP address of the destination device
.
3.
Select the
channel
to which the device connects.
4.
Select the
codec
to use.
5.
Select the
packet size
to use.
6.
Enter the
channel description
. (Optional)
7.
Select the
VAD check box
. (Optional)
Using the Device Configuration Pane
1.
(Optional) Enter a
description for RVON
.
2.
Send the
changes
to the device.
9.1.10
Configure an RVON keypanel to connect to OMS
i
Notice!
Applicable for the Advanced model only.
To
configure an RVON keypanel to accept a connection offer from an OMS
, do the following:
1.
On the RVON keypanel, navigate to
RVON Offers | Keypanel menu
.
2.
Select the
Matrix connection type
.
3.
Press the
SEL button
.
A list of available RVON connection offers display.
4.
Select the
RVON connection
.
An arrow displays next to the connection.
5.
Press
CLR
to exit menu mode.