Sony HVL-MT24AM User Manual

Page 46

background image

HVL-MT24AM_GB 2-889-493-01 (1)


While holding the diffuser by its panel’s

top tab, press it

against the face of the twin flash unit.

Press the diffuser until it clicks into place.

Notes on using the diffuser

 If the arm is set at the 60° position and used with a wide angle lens, the diffuser

may appear in the image. It is recommended that you always use the diffuser

with the arm set at the 90° position.

 The flash output is reduced when using the diffuser. See page 28 for TTL flash

metering, or page 38 for manual flash metering.