Philips HR7758 - Manual (Page 11)

ENGLISH 11
Never use the discs to process hard ingredients
such as ice cubes.
C
4 Place the disc you want to use on the tool
holder.
5 Close the lid and put the ingredients in the
feed tube.
C
6 Press the Î button on the control panel.
◗ The speed increases rapidly to the defined
processing speed to guarantee an optimal end
result.
◗ Press the ingredients slowly down the feed
tube with the pusher, if necessary.
Stainless steel kneading accessory
The kneading accessory, which has been marked
with
— , can be used for kneading yeast dough
for bread and pizzas.
C
1 Put the bowl on the motor unit and turn
the handle in the direction of the arrow.
C
2 Place the tool holder in the bowl and fit
the kneading accessory onto the tool
holder.
3 Put the ingredients in the bowl.
C
5 Press the
¨
button on the control panel.
The appliance will gradually increase the kneading
speed within 10 seconds to avoid splashing.This
speed will be maintained for about 50 seconds to
mix the ingredients properly.Then the speed will
decrease to a speed that is optimal for kneading.
The appliance will continue to run at this speed
until the stop button is pressed.You can decrease
or increase the speed up to 3 times by pressing
the - or + button.
Balloon beater
You can use the balloon beater to whisk eggs, egg
whites, instant pudding, cream, mayonnaise and
sponge cake mixtures.
When you want to whisk egg whites, make sure
the bowl and the whisk are entirely dry and free
from grease. Use egg whites at room
temperature.
Do not use the balloon beater to prepare cake
mixtures with butter or margarine and do not use
it to knead dough.
1 Put the bowl on the motor unit and turn it
to the left until you hear a click.
C
2 Put the tool holder in the bowl.