Philips HR7758 - Manual (Page 9)

ENGLISH 9
C
◗ Blender
You can only use the blender when the groove on
the blender jar is directly opposite the groove on
the motor unit and the two grooves together
form one long groove.
C
◗ Meat mincer
You can only use the meat mincer when the
screw cap is properly screwed onto the motor
unit, when you have turned the gear housing to
the left until you heard a click and you have
assembled the cutter housing on the gear housing
by turning it to the left until you heard a click.
C
◗ Citrus press
You can only use the citrus press when the screw
cap has been screwed properly onto the motor
unit, the bowl has been assembled correctly and
the sieve has been turned in the direction of the
arrow until a click was heard.
Food processing bowl
C
1 Make sure the screw cap is properly
screwed onto the motor unit, then mount
the bowl on the motor unit by turning the
handle in the direction of the arrow until
you hear a click.
C
2 Put the lid on the bowl.Turn the lid in the
direction of the arrow until you hear a
click (this may require some force).
1
CLICK
2
1
CLICK
2
1
2
CLICK
Feed tube and pusher
C
1 Use the feed tube to add liquid and/or
solid ingredients. Use the pusher to push
solid ingredients down the feed tube.
C
2 You can also use the pusher to close the
feed tube in order to prevent ingredients
from escaping through the feed tube.
Stainless steel blade
The blade can be used for chopping, mixing,
blending and pureeing.
The cutting edges of the blade are very sharp
Avoid touching them!
C
1 Remove the protective cover from the
blade.
C
2 Put the tool holder in the bowl and put
the blade on the tool holder.
3 Put the ingredients in the bowl. Pre-cut
large pieces of food into pieces of approx.
3 x 3 x 3 cm. Put the lid on the bowl.
4 Put the pusher in the feed tube.