Philips HR7758 - Manual (Page 18)

ENGLISH 18
C
4 Take out the two gearwheels and clean
them and the beater in hot water with
some washing-up liquid.
To reassemble the balloon beater:
C
5 First insert the small gearwheel into the
housing, then insert the larger gearwheel.
C
6 Close the housing by snapping the bottom
part onto the top part. Make sure both
ends snap home with a click.
7 Insert the beater.
Thorough cleaning of the adjustable slicing
disc
C
1 Turn the adjusting knob to the right and
pull the slicing insert out of the disc.
The disc, the slicing insert and the adjusting knob
can be cleaned in hot water with some washing-
up liquid or in the dishwasher.
Cleaning the meat mincer
The parts of the meat mincer are not dishwasher
proof!
1
2
1 First remove any meat left behind in the
cutter housing by passing pieces of bread
through the cutter housing.
2 Switch off the appliance and unplug it.
C
3 Remove the pusher and the tray.
C
4 Unscrew the screw ring and remove the
grinding disc, the cutter unit and the worm
shaft.
C
5 Remove the cutter housing from the gear
housing by pressing the release button and
turning it to the right.
C
6 Detach the gear housing by turning it to
the right.
C
7 Clean all parts that have come into contact
with meat with hot water and some
washing-up liquid immediately after use.
8 Rinse them with clean hot water and dry
them immediately with a tea towel.