Yokogawa GD40 Gas Density Detector - Manual (Page 150)

<7. HYDROGEN PURITY / PARAMETER SETTING>
7-27
IM 11T3E1-01E
CODE 43: Setting of High-resolution Mode [*S_CYC]
This setting selects between the normal mode and the high-resolution mode.
・ Normal mode: 0
・ High-resolution mode: 1
43
*CODE
*SERVC
X
*S_CYC
[ENT]
[ENT]
[YES]
F0724.ai
* 1
* 2
* 3
*1: See "Figure 7.4 Process at the Setting Level" on page 7-10.
*2: Enter the code number.
*3: Set a value by using the [ ], [ ] and [ENT] keys.
Figure7.24 Setting of High-resolution Mode
CODE 44: Setting of PASSWORD [ *PASS]
This setting defines the password.
44
*CODE
*SERVC
X.X.X
*PASS
F0725
* 1
* 2
* 3
*1: See "Figure 7.4 Process at the Setting Level" on page 7-10.
*2: Enter the code number.
*3: Set a value by using the [ ], [ ] and [ENT] keys.
[ENT]
[ENT]
[YES]
X.X.X
Service level
Setting level
Operation level
Password
X
(Setting)
Contents
(0) (No setting)
Note: Password entry request ( if a password is set)
At the operation level, a request is issued when the
[MODE] key is pressed in the measurement mode. At the
setting level, it is issued when the [ * ] key is pressed. At
the service level, it is issued when the [YES] key is
pressed with [*SERVC] displayed.
1
2
3
4
5
6
7
8
9
111
333
777
888
123
957
331
546
847
Figure 7.25 Setting of Password