Yokogawa GD40 Gas Density Detector - Manual (Page 85)

<5. DENSITY / PARAMETER SETTING>
5-30
IM 11T3E1-01E
CODE 42: Indication of Software Version [*REV] (Read-only)
This setting allows the software version to be confirmed (indicated).
Indicated as X.XX
42
*CODE
*SERVC
X.XX
*REV
[ENT]
[ENT]
[YES]
F0526.ai
*1: See "Figure 5.3 Process at the Setting Level" on page 5-10.
*2: Enter the code number.
*3: Pressing the [ENT] key returns to the service level with the indication [*SERVC].
This parameter does not accept the [ ] and [ ] key input.
* 3
* 2
* 1
Figure 5.25 Indication of Software Version
CODE 43: Setting of High-resolution Mode [*S_CYC]
This setting selects between the normal mode and the high-resolution mode.
・ Normal mode: 0
・ High-resolution mode: 1
43
*CODE
*SERVC
X
*S_CYC
F0527.ai
*1: See "Figure 5.3 Process at the Setting Level" on page 5-10.
*2: Enter the code number.
*3: Set a value by using the [ ] and [ ] key.
[ENT]
[ENT]
[YES]
* 3
* 2
* 1
Figure 5.26 Setting of High-resolution Mode