Starting from a windows/nt system via xvision, Section “starting from a windows/nt system via – FUJITSU CentricStor V3.1D User Manual
Page 108
Advertising
108
U41117-J-Z125-7-76
Starting GXCC
Operating and monitoring CentricStor
5.3.6.5
Starting from a Windows/NT system via XVision
When installing XVision, the UNIX environment must also have been installed.
XVision setting
An example is shown in the following diagram:
It is important that the display mode “Multiple windows” is set.
i
Advertising