FUJITSU CentricStor V3.1D - Manual (Page 515)

U41117-J-Z125-7-76 515
Explanation of console messages Message lines
SXTF006 PANIC: dtv_iactive(<maj,min>: <cnt> inode(s) in use
Meaning
The file system has been unmounted even though it was currently in use. This results in
a system crash.
Response
Notify maintenance staff if necessary.
SXTF007 ERROR: <func>:\ illegal value <val> for variable <var>, use default <val>
Meaning
The value of a variable configurable using space.c is invalid. As a result, the variable is
set to the default value.
Response
Notify maintenance staff.
SXTF008 DTV_FSCK(dev=<maj,min>): assertion failed: <which> ...programming error!
Meaning
The implicit file system check carried out when mounting a DTV file system has identified
an unexpected status.
Response
Notify maintenance staff if necessary.
SXTF009 ALERT: <fun>: cannot flush meta data to disk!
Meaning
This class of error messages indicates that write operations on the metadata could not be
performed. If the problem is temporary, the write operation will be performed later. If the
problem remains until the system is shut down, or the system crashes before the problem
is rectified, the CentricStor data maintenance system will be inconsistent.
Response
Check that the RAID controller and the Fibre Channel connection are okay. If the problem
cannot be rectified, notify maintenance staff.
SXTF010 DTV_FSCK(dev=<maj,min>):
unexpected inconsistency: <which> ...run fsck (-o'full') manually!
ALERT
Meaning
The implicit file system check carried out when mounting a DTV file system has identified
an inconsistency. As a result, the file system cannot be mounted.
Response
Notify maintenance staff if necessary.