FUJITSU CentricStor V3.1D - Manual (Page 329)

U41117-J-Z125-7-76 329
XTCC Margins of the main XTCC window
SERV XTCC mode (OBSV=Observe, SERV=Service, USER=User,
SIMU=Simulation).
80% Current window size setting (in the example, 80%).
Autoscan Green = started
Yellow = active
Red flashing = stopped / temporarily disabled
White =blocked (SIMU mode)
S 5s Autoscan operating mode and interval (S = self-adjusting, M = manually
adjusted).
n.me+op Read rate for InfoBroker data [n.m*10 op bytes/second]. The rate is calculated
using the transfer time of an InfoBroker record. When using a modem
connection, this value will also allow you to calculate the performance of the
connection.
Windows NT
Platform on which XTCC is running.
m.n XTCC version number.
The visual appearance of the main XTCC window is determined by the profile file. If you
close XTCC by selecting “File“
➟ “Exit”, the current settings will be saved to the ISP profile
file currently active (processor- and user-specific) so that they are available again the next
time the application is started. If this is not desired, XTCC must be terminated using the
System function (icon at top left) or using the Windows Manager function (“X” box at top
right) (for details on this see the
section “Exit” on page 334 ).
The procedures for creating and managing profile files is described on page 344 .